Slope status
-
-
Road-
Danger risk
-
Watch risk
-
Camera motion
-
-
Barrier
-
-
Session
-
-
Network
-
-
Slope camera-
-
-motion / 100
Camera not heard yet
Motion score · last 2 min
Motion score (one point / 5 s)20 = clear movement
AI risk assessment-
Risk timeline
WatchDangerAlert state strip
System healthDevices and links
Field sensors-
An orange edge means the reading is far from the quiet baseline the AI learned. Values under each reading are what the AI sees. Tilt 2 and vibration 2 copy the single MPU-6050.
Phone alarm
Vibrate and sound on this phone when the slope is in danger
Alert logWhat caused each change, newest first
Input testChecks every sensor and output, one step at a time
SettingsNetwork and controls
Change Wi-Fi network
The SlopeSense unit always keeps its own network SlopeSense. Here you choose the one network it joins (your phone hotspot). There is no fallback: if that network is off, open the dashboard through SlopeSense at 192.168.4.1. Saved on the board, no reflashing.
Tip: tap a network from the scan so the name is exact. If it can't join, it keeps trying; the SlopeSense network always stays on.
Cloud dashboard (view from anywhere)
Sends this dashboard's data through a free HiveMQ Cloud broker, so the cloud page works from any phone or laptop on any internet. Needs internet on the Wi-Fi above (phone hotspot with mobile data). Saved on the board.
Notifications
Danger always pops up. Choose what else does. Everything is kept in the bell list either way.
Controls
Ultrasonic off: the AI and the "surface moved" rule ignore it. Keep it off until the sensor is aimed at a fixed target on the slope, then switch it on and restart the session.
Restart after moving sensors: the first 30 s set the zero for tilt, distance and rain cup.
Restart after moving sensors: the first 30 s set the zero for tilt, distance and rain cup.